2-456
Cisco ME 3400 Ethernet Access Switch Command Reference
OL-9640-10
Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands
show interfaces transceivers
DWDM XENPAK ALL
DWDM X2 ALL
DWDM XFP ALL
CWDM GBIC NONE
CWDM X2 ALL
CWDM XFP ALL
XENPAK ZR ALL
X2 ZR ALL
XFP ZR ALL
Rx_only_WDM_XENPAK ALL
XENPAK_ER 10-1888-03
X2_ER ALL
XFP_ER ALL
XENPAK_LR 10-1838-04
X2_LR ALL
<output truncated>
This is an example of output from the show interfaces transceiver threshold-table command. Note that
these are thresholds programmed into IOS software, and are NOT used to determine alarms.
Optical Tx Optical Rx Temp Laser Bias Voltage
current
------------- ------------- ------ ------------ ---------
DWDM GBIC
Min1 -0.50 -28.50 0 N/A 4.50
Min2 -0.30 -28.29 5 N/A 4.75
Max2 3.29 -6.69 60 N/A 5.25
Max1 3.50 6.00 70 N/A 5.50
DWDM SFP
Min1 -0.50 -28.50 0 N/A 3.00
Min2 -0.30 -28.29 5 N/A 3.09
Max2 4.30 -9.50 60 N/A 3.59
Max1 4.50 9.30 70 N/A 3.70
RX only WDM GBIC
Min1 N/A -28.50 0 N/A 4.50
Min2 N/A -28.29 5 N/A 4.75
Max2 N/A -6.69 60 N/A 5.25
Max1 N/A 6.00 70 N/A 5.50
DWDM XENPAK
Min1 -1.50 -24.50 0 N/A N/A
Min2 -1.29 -24.29 5 N/A N/A
Max2 3.29 -6.69 60 N/A N/A
Max1 3.50 4.00 70 N/A N/A
DWDM X2
Min1 -1.50 -24.50 0 N/A N/A
Min2 -1.29 -24.29 5 N/A N/A
Max2 3.29 -6.69 60 N/A N/A
Max1 3.50 4.00 70 N/A N/A
DWDM XFP
Min1 -1.50 -24.50 0 N/A N/A
Min2 -1.29 -24.29 5 N/A N/A
Max2 3.29 -6.69 60 N/A N/A
Max1 3.50 4.00 70 N/A N/A
CWDM X2
Min1 N/A N/A 0 N/A N/A
Min2 N/A N/A 0 N/A N/A
Max2 N/A N/A 0 N/A N/A
Max1 N/A N/A 0 N/A N/A
To Next Page
Loading...
