Cisco ME 3400 - Page 527

2-499
Cisco ME 3400 Ethernet Access Switch Command Reference
OL-9640-10
Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands
show l2protocol-tunnel
Examples This is an example of output from the show l2protocol-tunnel command:
Switch> show l2protocol-tunnel
COS for Encapsulated Packets: 5
Drop Threshold for Encapsulated Packets: 0
Port Protocol Shutdown Drop Encapsulation Decapsulation Drop
Threshold Threshold Counter Counter Counter
---------- -------- --------- --------- ------------- ------------- -------------
Fa0/3 --- ---- ---- ---- ---- ----
--- ---- ---- ---- ---- ----
--- ---- ---- ---- ---- ----
pagp ---- ---- 0 242500
lacp ---- ---- 24268 242640
udld ---- ---- 0 897960
Fa0/4 --- ---- ---- ---- ---- ----
--- ---- ---- ---- ---- ----
--- ---- ---- ---- ---- ----
pagp 1000 ---- 24249 242700
lacp ---- ---- 24256 242660
udld ---- ---- 0 897960
Gi0/1 cdp ---- ---- 134482 1344820
--- ---- ---- ---- ---- ----
--- ---- ---- ---- ---- ----
pagp 1000 ---- 0 242500
lacp 500 ---- 0 485320
udld 300 ---- 44899 448980
This is an example of output from the show l2protocol-tunnel summary command:
Switch> show l2protocol-tunnel summary
COS for Encapsulated Packets: 5
Drop Threshold for Encapsulated Packets: 0
Port Protocol Shutdown Drop Status
Threshold Threshold
(cdp/stp/vtp) (cdp/stp/vtp)
(pagp/lacp/udld) (pagp/lacp/udld)
------- ----------- ---------------- ---------------- ----------
Fa0/2 --- --- --- ----/----/---- ----/----/---- up
pagp lacp udld ----/----/---- ----/----/----
Fa0/3 --- --- --- ----/----/---- ----/----/---- up
pagp lacp udld 1000/----/---- ----/----/----
Fa0/4 --- --- --- ----/----/---- ----/----/---- up
pagp lacp udld 1000/ 500/---- ----/----/----
Fa0/5 cdp stp vtp ----/----/---- ----/----/---- down
---- ---- ---- ----/----/---- ----/----/----
Gi0/1 --- --- --- ----/----/---- ----/----/---- down
pagp ---- ---- ----/----/---- 1000/----/----
Gi0/2 --- --- --- ----/----/---- ----/----/---- down
pagp ---- ---- ----/----/---- 1000/----/----
Related Commands Command Description
clear l2protocol-tunnel counters Clears counters for protocol tunneling ports.
l2protocol-tunnel Enables Layer 2 protocol tunneling for CDP, STP, or VTP
packets on an interface.
l2protocol-tunnel cos Configures a class of service (CoS) value for tunneled Layer 2
protocol packets.