Cisco ME 3400 - Page 579

2-551
Cisco ME 3400 Ethernet Access Switch Command Reference
OL-9640-10
Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands
show policer cpu uni-eni
Examples This is an example of output from the show policer cpu uni-eni drop command.
Switch# show policer cpu uni-eni drop
=========================================
Port In Dropped
Name Frames Frames
Fa0/1 300 0
Fa0/2 0 0
Fa0/3 0 0
Fa0/4 0 0
Fa0/5 200 0
Fa0/6 0 0
Fa0/7 0 0
Fa0/8 0 0
Fa0/9 508055 325086
Fa0/10 0 0
Fa0/11 0 0
Fa0/12 0 0
Fa0/13 0 0
Fa0/14 0 0
Fa0/15 0 0
Fa0/16 0 0
Fa0/17 0 0
Fa0/18 0 0
Fa0/19 0 0
Fa0/20 0 0
Fa0/21 0 0
Fa0/22 0 0
Fa0/23 0 0
Fa0/24 0 0
Gi0/1 0 0
Gi0/2 0 0
drop-all 0 1849645
This is an example of the new output format for the show policer cpu uni-eni drop interface command:
Switch# show policer cpu uni-eni drop interface gigabitethernet 0/1
============================
Policer assigned for Gi0/2
============================
Protocols using this policer:
"VTP" "CISCO_L2" "KEEPALIVE" "SWITCH_IGMP" "SWITCH_L2PT"
Policer rate: 160000 bps
In frames: 48014
Drop frames: 28630
This is an example of output from the show policer cpu uni-eni rate command when the default rate is
used.
Switch> show policer cpu uni-eni rate
CPU UNI/ENI port police rate = 160000 bps
This is an example of the show command output when CPU protection is disabled.
Switch# show policer cpu uni-eni rate
CPU Protection feature is not enabled