2-554
Cisco ME 3400 Ethernet Access Switch Command Reference
OL-9640-10
Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands
show policy-map
This is an example of output from the show policy-map command for a specific policy map:
Switch> show policy-map top2
Policy Map top2
Class class-default
shape average 11111124
service-policy pout
This is an example of output from the show policy-map command for an output policy map:
Switch> show policy-map pout
Policy Map pout
Class ip1
priority
police cir percent 10
conform-action transmit
exceed-action drop
queue-limit 250
queue-limit precedence 1 100
Class ip2
Average Rate Traffic Shaping
cir 5%
Class ip3
bandwidth percent 10
queue-limit 200
queue-limit precedence 3 100
This is an example of output from the show policy-map command for an input policy map:
Switch> show policy-map pin-police
Policy Map pin-police
Class ip1
police cir 20000000 bc 625000
conform-action transmit
exceed-action drop
To Next Page
Loading...
