Cisco ME 3400 - Page 645

2-617
Cisco ME 3400 Ethernet Access Switch Command Reference
OL-9640-10
Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands
spanning-tree cost
This example shows how to set a path cost to 300 for VLANs 10, 12 to 15, and 20:
Switch(config-if)# spanning-tree vlan 10,12-15,20 cost 300
You can verify your settings by entering the show spanning-tree interface interface-id privileged
EXEC command.
Related Commands Command Description
show spanning-tree interface
interface-id
Displays spanning-tree information for the specified interface.
spanning-tree port-priority Configures an STP port priority.
spanning-tree vlan priority Sets the switch priority for the specified spanning-tree instance.