Cisco ME 3400 - Page 90

2-62
Cisco ME 3400 Ethernet Access Switch Command Reference
OL-9640-10
Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands
cpu traffic qos cos
cpu traffic qos
qos-group
Maps all CPU-generated traffic to a single class in the output policy-maps
without changing the class of service (CoS), IP differentiated services code
point (DSCP), or IP-precedence packet markings.
policy-map Configures a policy map that can be attached to multiple physical ports and
enters policy-map configuration mode.
show cpu traffic qos Displays the QoS markings configured for CPU traffic.
show policy-map Displays QoS policy map information for the specified policy map name,
interface, input or output policy maps, or policy-map class.
show running-config Displays the configured class maps, policy maps, table maps, and aggregate
policers.
show table-map Displays information for all configured table maps or the specified table
map.
table-map Configures quality of service (QoS) mapping and enters table-map
configuration mode.
Command Description