Cisco ME 3400 - Page 916

C-36
Cisco ME 3400 Ethernet Access Switch Command Reference
OL-9640-10
Appendix C Cisco ME 3400 Ethernet Access Switch Show Platform Commands
show platform qos
Command Modes Privileged EXEC
policer {parameter-table | qos-table|
selection-table} [asic number]
(Optional) Display QoS policer information. The keywords
have these meanings:
• parameter-table—Display the policer parameter table.
• qos-table—Display the policer QoS table.
• selection-table—Display the port allocation table.
• asic number—(Optional) Display information based on
the port ASIC number. The number is always 0.
policy-map policy-map-name [asic
number]
(Optional) Display QoS information for the specified policy
map.
• asic number—(Optional) Display information based on
the port ASIC number. The number is always 0.
port-class [asic number] (Optional) Display QoS port class tables.
• asic number—(Optional) Display information based on
the port ASIC number. The number is always 0.
port-config port-number [asic
number]
(Optional) Display QoS port configuration information. The
keywords have these meanings:
• port-number—Display QoS configuration for the
specified port number. The range is 0 to 25.
• asic number—(Optional) Display information based on
the port ASIC number. The number is always 0.
port-info port-number [asic number] (Optional) Display QoS port information. The keywords have
these meanings:
• port-number—Display QoS configuration for the
specified port number. The range is 0 to 25.
• asic number—(Optional) Display information based on
the port ASIC number. The number is always 0.
table-map table-map-name [asic
number]
(Optional) Display QoS information for the specified table
map.
• asic number—(Optional) Display information based on
the port ASIC number. The number is always 0.
vlan vlan-id (Optional) Display QoS information for the specified VLAN.
The range is 1 to 4094.
statistics Display QoS interface statistics.
| begin (Optional) Display begins with the line that matches the
expression.
| exclude (Optional) Display excludes lines that match the expression.
| include (Optional) Display includes lines that match the specified
expression.
expression Expression in the output to use as a reference point.