Cisco ME 3400 - Page 94

2-66
Cisco ME 3400 Ethernet Access Switch Command Reference
OL-9640-10
Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands
cpu traffic qos dscp
CPU QoS:
Switch(config)# cpu traffic qos dscp dscp table-map dscp-to-dscp
Switch(config)# cpu traffic qos cos dscp table dscp-to-cos
Switch(config)# cpu traffic qos cos cos table cos-to-cos
Switch(config)# cpu traffic qos qos-group 50
Class:
Switch(config)# class-map match-any cpu-traffic
Switch(config-cmap)# match qos-group 50
Switch(config-cmap)# exit
Switch(config)# class-map match-any user-video
Switch(config-cmap)# match cos 3
Switch(config-cmap)# exit
Switch(config)# class-map match-any user-voice
Switch(config-cmap)# match cos 5
Switch(config-cmap)# exit
Policy:
Switch(config)# policy-map output-policy
Switch(config-pmap)# class user-voice
Switch(config-pmap-c)# priority
Switch(config-pmap-c)# police cir 10000000
Switch(config-pmap-c)# exit
Switch(config-pmap)# class user-video
Switch(config-pmap-c)# bandwidth percent 40
Switch(config-pmap-c)# exit
Switch(config-pmap)# class cpu-traffic
Switch(config-pmap-c)# bandwidth percent 10
Switch(config-pmap-c)# exit
Switch(config-pmap)# class class-default
Switch(config-pmap-c)# bandwidth percent 30
Switch(config-pmap-c)# exit
Interface:
Switch(config)# interface fastethernet0/1
Switch(config-if)# service-policy output output-policy
Switch(config-pmap-c)# exit
Related Commands Command Description
class-map Configures a class map to be used for matching packets to a specified criteria
and enters class-map configuration mode.
cpu traffic qos cos Configures class of service (CoS) marking for control plane traffic.
cpu traffic qos
precedence
Configure quality of service (QoS) marking based on precedence for control
plane traffic.
cpu traffic qos
qos-group
Maps all CPU-generated traffic to a single class in the output policy-maps
without changing the class of service (CoS), IP differentiated services code
point (DSCP), or IP-precedence packet markings.
policy-map Configures a policy map that can be attached to multiple physical ports and
enters policy-map configuration mode.
show cpu traffic qos Displays the QoS markings configured for CPU traffic.
show policy-map Displays QoS policy map information for the specified policy map name,
interface, input or output policy maps, or policy-map class.