2-70
Cisco ME 3400 Ethernet Access Switch Command Reference
OL-9640-10
Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands
cpu traffic qos precedence
Interface:
switch(config)# interface g1/0/1
switch(config-if)# service-policy output output-policy
switch(config-if)# exit
Related Commands Command Description
class-map Configures a class map to be used for matching packets to a specified criteria
and enters class-map configuration mode.
cpu traffic qos cos Configures class of service (CoS) marking for control plane traffic.
cpu traffic qos dscp Configures quality of service (QoS) marking based on DSCP for control
plane traffic.
cpu traffic qos
qos-group
Maps all CPU-generated traffic to a single class in the output policy-maps
without changing the class of service (CoS), IP differentiated services code
point (DSCP), or IP-precedence packet markings.
policy-map Configures a policy map that can be attached to multiple physical ports and
enters policy-map configuration mode.
show cpu traffic qos Displays the QoS markings configured for CPU traffic.
show policy-map Displays QoS policy map information for the specified policy map name,
interface, input or output policy maps, or policy-map class.
show running-config Displays the configured class maps, policy maps, table maps, and aggregate
policers.
show table-map Displays information for all configured table maps or the specified table
map.
table-map Configures quality of service (QoS) mapping and enters table-map
configuration mode.
To Next Page
Loading...
