Cisco Nexus 7000 Series - Eplds Available with Release 6.0(1); Supported Switch Operating Systems

Send document comments to nexus7k-docfeedback@cisco.com
7-38
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
OL-23069-06
Chapter 7 Managing the Switch Hardware
Configuring EPLDs
• Two fan tray modules (Cisco Nexus 7018)
You must be able to access the system through a console, SSH, or Telnet.
You must have administrator privileges to work with the Cisco Nexus 7000 Series switches.
Supported Switch Operating Systems
The Cisco Nexus 7000 Series switch must be running the Cisco NX-OS operating system, which is used
to perform the EPLD upgrades.
EPLDs Available with Release 6.0(1)
Each EPLD image that you can download from http://www.cisco.com is a bundle of EPLD upgrades. To
see the updated EPLD versions for each release, see Table 7-11.
Table 7-11 EPLD Upgrades for Cisco NX-OS Releases
Module Type Release
EPLD Device 4.0(x) 4.1(2) 4.2(4) 4.2(6) 5.0(2) 5.0(3) 5.1(1) 5.2(1) 6.0(1)
Supervisor module
(N7K-SUP1)
Power Manager
IO
INBAND
Local Bus and CPLD
CMP CPLD
3.6
3.25
1.7
2.1
6.0
3.7
3.26
–
3.0
–
–
–
–
–
–
–
–
–
–
–
3.009
3.028
1.008
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
48-port 10/100/1000 Ethernet I/O module
(N7K-M148GT-11 and N7K-M148GT-11L [beginning with Release 5.1(2)])
Power Manager
IO
Forwarding Engine
5.3
2.10
1.6
5.4
2.11
–
–
–
–
–
–
–
5.006
2.013
–
–
–
–
–
2.014
–
–
–
–
–
–
–
48-port 1-Gigabit Ethernet I/O module
(N7K-M148GS-11 and N7K-M148GS-11L [beginning with Release 5.0])
Power Manager
IO
SFP
Forwarding Engine
N/A
1
N/A
1
N/A
1
N/A
1
4.6
1.3
1.4
1.6
–
–
–
–
–
–
–
–
4.008
1.005
–
–
–
–
–
–
–
1.006
–
–
–
–
–
–
–
–
–
–
48-port 1-/10-Gigabit Ethernet I/O modules
(N7K-F248XP-25)
Power Manager
IO
N/A
1
N/A
1
N/A
1
N/A
1
N/A
1
N/A
1
N/A
1
N/A
1
N/A
1
N/A
1
N/A
1
N/A
1
N/A
1
N/A
1
N/A
1
N/A
1
1.006
0.006