Send document comments to nexus7k-docfeedback@cisco.com
1-17
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
OL-23069-06
Chapter 1 Overview
Preparing the Site
Figure 1-12 Cisco Nexus 7018 Chassis Installed in a Four-Post Rack
Preparing the Site
Warning
Installation of the equipment must comply with local and national electrical codes.
Statement 1074
Before you can install a Cisco Nexus 7000 Series system, you must prepare the site for the installation.
You must make sure that the altitude, temperature, humidity, air quality, airflow, electromagnetic and
radio frequency interference, floor structure, power, and earth grounding of the installation site all meet
the requirements of the Cisco Nexus 7000 Series system that you are installing. In addition, you must
To Next Page
Loading...
