Cisco Nexus 7000 Series - Managing the System Hardware; Replacing Components

Send document comments to nexus7k-docfeedback@cisco.com
1-19
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
OL-23069-06
Chapter 1 Overview
Managing the System Hardware
Managing the System Hardware
After the Cisco Nexus 7000 Series system is installed and operating, you can use the Cisco NX-OS
operating system to manage the system hardware. These management functions include displaying
system and module information, setting the power supply modes, and managing module functions. For
more information about these functions, see Chapter 7, “Managing the Switch Hardware.”
Replacing Components
While the Cisco Nexus 7000 Series system is operational, you can replace any one of the following
components if they are redundant:
• Power supply
• Supervisor module
• Fabric module
• I/O modules
• Fan trays (Cisco Nexus 7009 and 7018)
• System fan tray (Cisco Nexus 7010)
• Fabric fan tray (Cisco Nexus 7010)
For detailed information on replacing these components, see Chapter 9, “Replacement Procedures.”