Cisco Nexus 7000 Series - Appendix; Transceivers and Module Connectors; 10-Gigabit SFP+ Transceivers and Fabric Extender Transceivers

Send document comments to nexus7k-docfeedback@cisco.com
B-1
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
OL-23069-06
APPENDIX
B
Transceivers and Module Connectors
This appendix specifies the transceivers and module connectors used with the Cisco Nexus 7000 Series
switches.
This appendix includes the following sections:
• 10-Gigabit SFP+ Transceivers and Fabric Extender Transceivers, page B-1
• 10-Gigabit X2 Transceivers, page B-4
• 1-Gigabit SFP Transceivers, page B-9
• RJ-45 Module Connectors, page B-16
10-Gigabit SFP+ Transceivers and Fabric Extender Transceivers
The 10-Gigabit SFP+ transceivers are used with the following I/O modules:
• 48-port 1- and 10-Gigabit I/O module (N7K-F248XP-25)
• 32-port 10-Gigabit Ethernet I/O module (N7K-M132XP-12)
• 32-port 10-Gigabit Ethernet I/O module with XL option (N7K-M132XP-12L)
• 32-port 1- and 10-Gigabit Ethernet I/O module (N7K-F132XP-15)
• 8-port 10-Gigabit Ethernet I/O module (N7K-M108X2-12L) (requires the OneX Converter Module
to adapt the SFP+ transceiver to the X2 ports on this I/O module)
The 10-Gigabit Fabric Extender Transceiver (FET) is used with only the following I/O modules when
connecting them to the Cisco Nexus 2248TP, Cisco Nexus 2232PP, and Cisco Nexus 2224TP Fabric
Extenders (FEXs):
• 48-port 1- and 10-Gigabit I/O module (N7K-F248XP-25)
• 32-port 10-Gigabit Ethernet I/O module (N7K-M132XP-12)
• 32-port 10-Gigabit Ethernet I/O module with XL option (N7K-M132XP-12L)
You can also use the SFP-10G-SR and SFP-10G-LR transceivers when connecting the 32-port
10-Gigabit Ethernet I/O modules to FEXs.
To see which transceivers are used with each of the I/O modules, see Table B-1.