Send document comments to nexus7k-docfeedback@cisco.com
9-54
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
OL-23069-06
Chapter 9 Replacement Procedures
Replacing the Cable Management Frame on the Cisco Nexus 7018 Chassis
Figure 9-26 Removing an Upper-Cable-Management Assembly
Step 5
For the lower cable management assembly on the left, loosen and remove four M4x10 screws, and then
lift off the assembly as shown in Figure 9-27.
1 Rack-mount bracket. 3 Loosen and remove five M4x10 screws.
2 Upper cable management assembly. 4 Lift the upper cable management assembly off
the rack-mount bracket hooks.
To Next Page
Loading...
