Send document comments to nexus7k-docfeedback@cisco.com
9-68
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
OL-23069-06
Chapter 9 Replacement Procedures
Replacing the Front Door and Air Intake Assemblies on the Cisco Nexus 7018 Chassis
Figure 9-39 Removing the Four Ball-Headed Studs
s.
Repack the air intake frame and ball-point studs in their original packing box, then fold over the box
flaps and tape them shut.
t. Open the box for the front door and air intake frame kit and insert the components as shown in
Figure 9-40.
u. Close the box flaps and tape them shut.
1 Ball-point stud
To Next Page
Loading...
