Send document comments to nexus7k-docfeedback@cisco.com
9-75
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
OL-23069-06
Chapter 9 Replacement Procedures
Replacing the Front Door and Air Intake Assemblies on the Cisco Nexus 7018 Chassis
Figure 9-45 Fastening Ball-Point Studs to the Air Intake Area
Step 10
Align the air intake frame to the four ball-point studs and press the frame onto the chassis, as shown in
Figure 9-46. The two captive screws on the air-intake frame should align with their screw holes in the
chassis.
1 Ball-point stud
To Next Page
Loading...
