Send document comments to nexus7k-docfeedback@cisco.com
Contents
v
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
OL-23069-06
Required Tools and Equipment 4-4
Attaching the Bottom-Support Rails 4-4
Installing the Chassis 4-7
Prerequisites for Installing the Chassis 4-7
Required Tools and Equipment 4-8
Installing the Chassis 4-9
Grounding the Cisco Nexus 7018 Chassis 4-12
Prerequisites for Grounding the Chassis 4-12
Required Tools and Equipment 4-12
Connecting the System Ground 4-13
Connecting Your ESD Wrist Strap to the Chassis 4-14
Installing the Cable Management Frame 4-15
Installing the Front Door and Air Intake Frame 4-20
Installing and Formatting CompactFlash Cards 4-30
CHAPTER
5 Installing Power Supply Units 5-1
Installing Power Supply Units 5-1
Connecting an AC Power Supply Unit to AC Power Sources 5-2
Prerequisites for Connecting AC Power Supply Units to AC Power Sources 5-3
Required Tools and Equipment 5-3
Connecting a 6-kW AC Power Supply Unit to AC Power Sources 5-3
Connecting a 7.5-kW AC Power Supply Unit to AC Power Sources 5-4
Connecting a DC Power Supply Unit to DC Power Sources 5-5
Grounding a 6-kW DC Power Supply Unit 5-5
Prerequisites for Grounding a DC Power Supply Unit 5-5
Required Tools and Equipment 5-6
Connecting a DC Power Supply Unit to the Earth Ground 5-6
Connecting a DC Power Supply Unit Directly to DC Power Sources 5-7
Connecting a Power Supply Unit to DC Power Sources though a Power Interface Unit 5-11
Required Tools and Equipment 5-13
Installing the PIU in a Rack 5-13
Grounding the PIU 5-15
Connecting the DC Power Supply Unit to a Power Source through a PIU 5-16
CHAPTER
6 Connecting the Cisco Nexus 7000 Series Switch to the Network 6-1
Preparing for Connections 6-1
Required Tools and Equipment 6-1
Connecting to the Console 6-2
To Next Page
Loading...
