Cisco Nexus 7000 Series - Page 8

Send document comments to nexus7k-docfeedback@cisco.com
Contents
viii
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
OL-23069-06
CHAPTER 9 Replacement Procedures 9-1
Replacing an AC Power Supply Unit During Operations 9-1
Required Tools 9-2
Removing an AC Power Supply Unit During Operations 9-2
Installing an AC Power Supply Unit During Operations 9-6
Replacing a DC Power Supply Unit During Operations 9-8
Removing a DC Power Supply Unit During Operations 9-8
Installing a DC Power Supply Unit During Operations 9-10
Replacing a Supervisor Module 9-12
Required Tools 9-12
Replacing One of Two Supervisor Modules During System Operations 9-12
Replacing a Supervisor Module in a Single-Supervisor System 9-18
Upgrading Memory for Supervisor Modules 9-20
Adding 4 GB of Memory to a Supervisor Module 9-21
Removing 4 GB of Memory from a Supervisor Module 9-23
Replacing an I/O Module 9-25
Required Tools 9-26
Replacing an I/O Module 9-26
Replacing a Cisco Nexus 7009 Fabric Module During Operations 9-31
Replacing a Cisco Nexus 7010 or 7018 Fabric Module During Operations 9-32
Required Tools 9-32
Replacing a Cisco 7010 or 7018 Fabric Module 9-32
Replacing a Cisco Nexus 7009 Fan Tray During Operations 9-37
Replacing a Cisco Nexus 7010 System Fan Tray During Operations 9-38
Required Tools 9-38
Replacing a Cisco Nexus 7010 System Fan Tray 9-38
Replacing a Cisco Nexus 7010 Fabric Fan Tray During System Operations 9-39
Required Tools 9-39
Replacing a Cisco Nexus 7010 Fabric Fan Tray 9-39
Replacing a Cisco Nexus 7018 Fan Tray During System Operations 9-40
Replacing a CompactFlash Card 9-41
Replacing the Front Doors and Frame Assembly on the Cisco Nexus 7010 Chassis 9-42
Required Tools 9-42
Removing the Front Doors and Frame Assembly 9-42
Installing the Front Doors and Frame Assembly 9-47
Replacing the Cable Management Frame on the Cisco Nexus 7018 Chassis 9-52
Required Tools 9-52
Removing the Cable Management Frame 9-52