Cisco Nexus 7000 - Page 5

Contents
v
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
OL-23069-07
Prerequisites for Grounding the Chassis 4-12
Required Tools and Equipment 4-12
Connecting the System Ground 4-12
Connecting Your ESD Wrist Strap to the Chassis 4-14
Installing Storage Media in a Supervisor Module 4-16
Installing the Front Doors and Frame Assembly 4-17
Installing the Air Filter 4-23
CHAPTER 5 Installing a Cisco Nexus 7018 Chassis 5-1
Preparing to Install the Switch 5-1
Required Tools 5-2
Installing a Four-Post Rack or Cabinet 5-2
Unpacking and Inspecting a New Chassis 5-3
Installing the Bottom-Support Rails on the Rack 5-4
Prerequisites for Attaching the Bottom-Support Rails 5-4
Required Tools and Equipment 5-4
Attaching the Bottom-Support Rails 5-4
Installing the Chassis 5-7
Prerequisites for Installing the Chassis 5-7
Required Tools and Equipment 5-8
Installing the Chassis 5-9
Grounding the Cisco Nexus 7018 Chassis 5-13
Prerequisites for Grounding the Chassis 5-13
Required Tools and Equipment 5-13
Connecting the System Ground 5-14
Connecting Your ESD Wrist Strap to the Chassis 5-15
Installing the Cable Management Frame 5-16
Installing the Front Door and Air Intake Frame 5-21
Installing Storage Media in a Supervisor Module 5-31
CHAPTER 6 Installing Power Supplies 6-1
Required Tools and Equipment 6-1
Installing Power Supplies 6-2
Connecting an AC Power Supply to AC Power Sources 6-3
Prerequisites for Connecting AC Power Supplies to AC Power Sources 6-5
Connecting a 3-kW AC Power Supply to AC Power Sources 6-5
Connecting a 6-kW AC Power Supply to AC Power Sources 6-6
Connecting a 7.5-kW AC Power Supply to AC Power Sources 6-7