Cisco Nexus 7000 - Page 6

Contents
vi
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
OL-23069-07
Connecting a DC Power Supply to DC Power Sources 6-8
Grounding a 3-kW DC Power Supply 6-8
Grounding a 6-kW DC Power Supply 6-8
Connecting a DC Power Supply Directly to DC Power Sources 6-10
Connecting a 3-kW DC Power Supply Directly to DC Power Sources 6-15
Connecting a 6-kW DC Power Supply to a DC Power Source 6-17
Connecting a Power Supply to DC Power Sources through a Power Interface Unit 6-18
Required Tools and Equipment 6-23
Installing the PIU in a Rack 6-23
Grounding the PIU 6-25
Connecting the DC Power Supply to a Power Source Through a PIU 6-26
CHAPTER 7 Connecting the Cisco Nexus 7000 Series Switch to the Network 7-1
Preparing for Connections 7-1
Required Tools and Equipment 7-1
Connecting to the Console 7-2
Creating an Initial Switch Configuration 7-3
Setting Up the Management Interface 7-4
Connecting the Supervisor CMP Port 7-5
Connecting an I/O Module 7-6
Connecting or Disconnecting a 1000BASE-T Port 7-9
Connecting a 1000BASE-T Port to the Network 7-10
Disconnecting a 1000BASE-T Port from the Network 7-10
Connecting or Disconnecting an SFP, SFP+, or X2 Port 7-10
Installing a Transceiver 7-11
Removing a Transceiver 7-11
Connecting a Fiber-Optic Cable to a Transceiver 7-12
Disconnecting a Fiber-Optic Cable from a Transceiver 7-12
Maintaining Transceivers and Fiber-Optic Cables 7-13
CHAPTER 8 Managing the Switch Hardware 8-1
Displaying the Switch Hardware Inventory 8-1
Displaying the Switch Serial Number 8-7
Displaying Power Usage Information 8-9
Power Supply Configuration Modes 8-10
Power Supply Configuration Overview 8-10
Configuring the Power Supply Mode 8-11
Power Supply Configuration Guidelines 8-12