Cisco Nexus 7706 - 1-Gb SFP Transceivers; 1000 BASE-CWDM SFP Transceiver Cables

ITU ChannelWavelength (nm)Connector TypeCable TypeTransceiver Type
DWDM-SFP10G-56.55 26
DWDM-SFP10G-57.36 25
DWDM-SFP10G-58.17 24
DWDM-SFP10G-58.98 23
DWDM-SFP10G-59.79 22
DWDM-SFP10G-60.61 21
DWDM-SFP10G-61.41 20
6
Single-mode fiber optic (SMF)
For the specifications that differentiate the 10GBASE-DWDM SFP+ transceivers, see the 10-Gigabit Ethernet
Transceiver Modules Compatibility Matrix.
1-Gb SFP Transceivers
The following table indicates which 1-Gigabit SFP transceivers can be used with the 1-Gigabit Ethernet (GE)
I/O modules:
M3 Series 48-port 1-/10-GE
(N77-M348XP-23L)
F3 Series 48-port
1-/10-GE
(N77-F348XP-23)
F2 Series 48-Port
1-/10-GE
(N77-F248XP-23E)
Transceiver
XXX
CWDM-SFP-xxxx
XXX
DWDM-SFP-xxxx
XXXGLC-BX-D
XXXGLC-BX-U
XXXGLC-EX-SMD
XXXGLC-LH-SMD
XXXGLC-SX-MMD
XXXGLC-T
XXXGLC-ZX-SMD
XXXSFP-GE-T
1000BASE-CWDM SFP Transceiver Cables
The Coarse Wavelength Division Multiplexing (CWDM) SFP transceivers are hot-swappable transceivers
that you plug into SFP-compatible I/O modules. The CWDM SFP transceiver uses an LC optical connector
to connect to a single-mode fiber-optic (SMF) cable. You can connect the CWDM SFPs to CWDM passive
optical system optical add/drop multiplexer (OADM) modules or multiplexer/demultiplexer plug-in modules
Cisco Nexus 7706 Hardware Installation Guide
137OL-31330-01
Switch Specifications
1-Gb SFP Transceivers