Cisco Nexus 7706 - Displaying Temperatures for Modules

8 L2L3Dev2Sn2(s13 125 115 66 Ok
8 L3Lkup2Sn1(s14) 125 105 55 Ok
8 L3Lkup2Sn2(s15) 125 105 56 Ok
9 Inlet (s1) 60 42 17 Ok
9 Crossbar(s2) 125 115 64 Ok
9 L2L3Dev1(s3) 125 110 42 Ok
9 Arbiter (s4) 125 105 57 Ok
9 CPU1CORE1(s5) 85 75 29 Ok
9 CPU1CORE2(s6) 85 75 27 Ok
9 CPU1CORE3(s7) 85 75 30 Ok
9 CPU1CORE4(s8) 85 75 29 Ok
9 CPU2CORE1(s9) 85 75 24 Ok
9 CPU2CORE2(s10) 85 75 21 Ok
9 CPU2CORE3(s11) 85 75 23 Ok
9 CPU2CORE4(s12) 85 75 21 Ok
9 DDR3DIMM1(s13) 95 85 28 Ok
9 DDR3DIMM2(s14) 95 85 27 Ok
9 DDR3DIMM4(s16) 95 85 21 Ok
9 DDR3DIMM5(s17) 95 85 22 Ok
10 L2L3Dev1(s3) 125 110 49 Ok
10 Arbiter (s4) 125 105 61 Ok
10 CPU1CORE1(s5) 85 75 41 Ok
10 CPU1CORE2(s6) 85 75 37 Ok
10 CPU1CORE3(s7) 85 75 39 Ok
10 CPU1CORE4(s8) 85 75 38 Ok
10 CPU2CORE1(s9) 85 75 26 Ok
10 CPU2CORE2(s10) 85 75 23 Ok
10 CPU2CORE3(s11) 85 75 24 Ok
10 CPU2CORE4(s12) 85 75 22 Ok
10 DDR3DIMM1(s13) 95 85 30 Ok
10 DDR3DIMM2(s14) 95 85 28 Ok
10 DDR3DIMM4(s16) 95 85 25 Ok
10 DDR3DIMM5(s17) 95 85 26 Ok
switch#
Displaying Temperatures for Modules
Each supervisor, I/O, and fabric module has temperature sensors with two thresholds:
• Minor temperature threshold—When a minor threshold is exceeded, a minor alarm occurs and the
following actions occur for all four sensors:
• Displays system messages
• Sends Call Home alerts (if configured)
• Sends SNMP notifications (if configured)
• Major temperature threshold—When a major threshold is exceeded, a major alarm occurs and the following
actions occur:
• For sensors 1, 3, and 4 (outlet and onboard sensors), the following actions occur:
• Displays system messages.
• Sends Call Home alerts (if configured). For more information, refer Associating an Alert Group
with a Destination Profile .
Cisco Nexus 7706 Hardware Installation Guide
OL-31330-0160
Managing the Switch
Displaying Temperatures for Modules