Cisco Nexus 7706 - Page 4

Installing the Chassis on a Four-Post Rack or Cabinet 26
Grounding a Switch Chassis 31
Grounding the Front ID Door 33
Installing Cable Management Frames onto the Chassis 36
Attaching the Front Door to the Chassis 38
Installing Air Filters 40
Connecting to the Network 43
CHAPTER 4
Guidelines for Connecting Ports 43
Connecting a Console to the Switch 44
Connecting the Management Interface 45
Creating the Initial Switch Configuration 46
Connecting Interface Ports to the Network 47
Connecting a Fiber-Optic Cable to a Transceiver 47
Disconnecting Optical Ports from the Network 48
Maintaining Transceivers and Optical Cables 48
Managing the Switch 51
CHAPTER 5
Displaying Information About Installed Hardware Modules 51
Displaying the Hardware Inventory for a Switch 54
Displaying the Backplane and Serial Number Information 55
Displaying Environmental Information for a Switch 57
Displaying Temperatures for Modules 60
Connecting to a Module 62
Saving the Module Configuration 63
Displaying Power Usage Information 63
Reloading a Module 64
Rebooting the Switch 64
Overview of Supervisor Modules 65
Shutting Down a Supervisor Module 65
Overview of I/O Module Support 65
Accessing an I/O Module through a Console 67
Displaying Information for the Installed Modules 67
Purging the Module Configuration 70
Cisco Nexus 7706 Hardware Installation Guide
OL-31330-01iv
Contents