81
24.14. Mount the deco grille to the screen
Repeat this procedure for both brackets.
Note:
The deco
grille has a
handle at
center, for
pulling the
screen up
and down.
1. Enter screws
(M4x8, Torx 20) in the holes at the
rear side of the screen, without tightening.
2. Attach the deco grille to the rear of the screen
by hanging the vertical supports onto the
screws.
Holes for brackets at the
rear side of the screen.
×2
Don't tighten the screws
so much that it becomes
difficult to hang the
bracket on them.
Rear view
×2
3. Push the deco grille up and align it to the
screen before tightening the screws.
Rear view
×2
To Next Page
Loading...