Cisco RV132W

Configuration Commands
wlan
Cisco RV34xx Router CLI Reference Guide 46
4
Parameters
interface - Enter the wlan interface.
ssid - Enter the SSID.
Default Configuration
None.
Example
The following example configures the wlan SSID.
router06000a>wlan --i wl0 --ssid SSID1
wlan --ssid ssid --mode mode --band band --channel channel
--vlan vlanID
To configure the mode, band, channel, and VLAN, use the wlan --ssid ssid --mode
mode --band band --channel channel --vlan vlanID command.
Parameters
ssid - Enter the SSID
mode - Enter the transfer mode.
band - Enter the wireless channel width.
channel - Enter the channel.
vlanID - Enter the vlan ID.
Default Configuration
None.
Example
The following example displays the wlan configuration for mode, band, channel,
and vlan.
router06000a> wlan --ssid test24g2 --mode bgn-mixed --band 20/40 --channel 7 --vlan 1
router06000a>wlan --ssid test5g3 --mode anac-mixed --band 80 --channel 40