Cisco RV132W

Management Commands
restoredefault
Cisco RV132W ADSL2+ Wireless-N and RV134W VDSL2 Wireless-AC VPN Router CLI Reference Guide 16
3
restoredefault
The restoredefault command restores the router to factory default settings.
Parameter
None.
Default Configuration
None.
Example
The following example displays the restoredefault command used to restore the
default settings of your router.
router06000a>restoredefault
save
The save command let you save your settings on the router.
Parameter
None.
Default Configuration
None.
Example
The following example displays the save command.
router06000a>save