Cisco RV132W

Configuration Commands
wan
Cisco RV34xx Router CLI Reference Guide 43
4
Example
The following example displays how to delete a wan Ethernet service.
router06000a>wan delete service eth --vlan 6
wan show
To show the status of the wan, use the wan show command.
Parameter
wan show - Enter wan show.
Default Configuration
None.
Example
The following example displays the status of the wan.
router06000a>wan show
wan show interface
To show the status of the wan, use the wan show interface command.
Parameter
wan show interface - Enter wan show interface.
Default Configuration
None.
Example
The following example displays the wan show interface command.