Cisco RV132W Command Line Interface Reference Guide

Configuration Commands
tr69cfg
Cisco RV34xx Router CLI Reference Guide 27
4
Default Configuration
None.
Example
The following example displays the lanhosts show all command.
router06000a>lanhosts show all
lanhosts show vlanX
To show the lanhosts vlan ID, use the lanhosts show vlanX command.
Parameter
lanhosts show vlanX - Enter lanhosts show vlanX.
Default Configuration
None.
Example
The following example displays the lanhosts show vlanX command.
router06000a>lanhosts show vlan88
tr69cfg
The tr69cfg command manages the application layer protocol. The tr69cfg
commands executed on the command line generate status information regarding
tr69cfg processes, or are used to stop and start specific tr69cfg services. All the
tr69cfg commands are listed here:
• tr69cfg {enable | disable}
• tr69cfg modify --interval informinterval --acsurl acsurl --acsuser
acsuser --acspwd acspwd --cruser connrequser --crpwd connreqpwd
• tr69cfg show

Cisco RV132W Specifications

General

Brand	Cisco
Model	RV132W
Category	Network Router
Language	English