Cisco RV180 Administrator's Manual

Administering Your Cisco RV180/RV180W
Configuring the WAN Traffic Meter
Cisco RV180/RV180W Administration Guide 140
7
To restart the traffic counter:
STEP 1 Choose Administration > WAN Traffic Meter.
STEP 2 Under Traffic Counter, select Restart Now, or Specific Time, and enter the time you
want the traffic counter to restart.
STEP 3 (Optional) Check the box to send an email report containing the traffic meter
statistics before the counter is reset.
STEP 4 Click Save.
To configure what the Cisco RV180/RV180W does when the traffic limit is
reached:
STEP 1 Choose Administration > WAN Traffic Meter.
STEP 2 Under When Limit Is Reached, select one of the following:
• Block All Traffic—All traffic to and from the Cisco RV180/RV180W is
blocked.
• Block All Traffic Except E-Mail—Only email is allowed to and from the
Cisco RV180/RV180W.
STEP 3 (Optional) Check the box to send an email alert when the traffic limit has been
reached and traffic is being blocked.
STEP 4 Click Save.
To view traffic statistics, choose Administration > WAN Traffic Meter. Under WAN
(Internet) Traffic Statistics, information is displayed about WAN traffic to and from
the Cisco RV180/RV180W.

Cisco RV180 Specifications

General

WAN Ports	1
LAN Ports	4
VPN Support	Yes
Wireless Support	No
Firewall	Yes
Device Type	VPN Router
VPN Tunnels	10
Authentication	MD5, SHA1
Power Supply	12V DC, 1A
Encryption	3DES, AES
VPN Protocols	IPSec
Operating Temperature	0 to 40 °C
Storage Temperature	-20 to 70 °C
Humidity	10% to 85% non-condensing
Dimensions	130 x 130 x 35 mm
Weight	0.28 kg