Cisco RV180 Administrator's Manual

Viewing the Cisco RV180/RV180W Status
Viewing the System Summary
Cisco RV180/RV180W Administration Guide 159
8
STEP 3 If applicable, to change a system setting, click its corresponding Edit link.
The System Summary page displays this information:
System Information
LAN (Local Network) Information
Host Name The name of the device.
Firmware Version Current software version the device is running.
Firmware MD5
Checksum
The message-digest algorithm used to verify the
integrity of files.
PID VID Product ID and vendor ID of the device.
Serial Number The serial number of the device.
MAC Address The MAC address of the device.
IPv4 Address The IP address and subnet mask of the device.
IPv6 Address The IP address and subnet mask of the device
(shown only if IPv6 is enabled).
DHCP Server The status of the router’s DHCP server
(enabled or disabled). If it is enabled, DHCP client
machines connected to the LAN port receive their
IP address dynamically.
DHCP Relay Indicates if the device is acting as a DHCP relay.
DHCPv6 Server Indicates if the device’s DHCPv6 server is enabled
or disabled. If it is enabled, DHCPv6 client systems
connected to the LAN port receive their IP address
dynamically.

Cisco RV180 Specifications

General

Brand	Cisco
Model	RV180
Category	Network Router
Language	English