Cisco RV180 Administrator's Manual

Configuring Networking
Configuring the LAN (Local Network) Settings
Cisco RV180/RV180W Administration Guide 41
2
STEP 4 In the Port Configuration Table, you can select a port and configure the following:
STEP 5 Click Save.
Hello Time The hello time is the time period that the root of the
spanning tree waits before sending hello
messages. Enter a number from 1 to 10 seconds.
The default is 2.
Max Age The max age is the time period that the router waits
to receive a hello message. If the max age is
reached, the router tries to change the spanning
tree to use another path to the root node. Enter a
number from 6 to 40 seconds. The default is 20.
Forward Delay The forward delay is the interval spent by a port in
learning state before moving to the forwarding
state. Enter a number from 4 to 30 seconds. The
default is 15.
Migrate Time Migrate time is the maximum time spent by a port
locked in RSTP mode. As soon as this timer
expires, the port adapts to the mode (RSTP/STP)
that corresponds to the next hello message. Enter a
number from 0 to 65535. The default is 3.
Interface Displays the interface that is a port of the RSTP-
enabled bridge.
Port Priority The priority assigned tot he bridge port for
determining the root port.
Edge Status Displays the edge status of the port.
Port Cost The cost of using the interface-based connection.

Cisco RV180 Specifications

General

WAN Ports	1
LAN Ports	4
VPN Support	Yes
Wireless Support	No
Firewall	Yes
Device Type	VPN Router
VPN Tunnels	10
Authentication	MD5, SHA1
Power Supply	12V DC, 1A
Encryption	3DES, AES
VPN Protocols	IPSec
Operating Temperature	0 to 40 °C
Storage Temperature	-20 to 70 °C
Humidity	10% to 85% non-condensing
Dimensions	130 x 130 x 35 mm
Weight	0.28 kg