Cisco RV260 series - Page 11

SpecificationDescription
• Dynamic Host Configuration Protocol (DHCP)
server
• Point-to-Point Protocol over Ethernet (PPPoE)
• Point-to-Point Tunneling Protocol (PPTP)
• Layer 2 Tunneling Protocol (L2TP)
• DNS proxy
• DHCP relay agent
• IGMP Proxy and multicast forwarding
• Rapid Spanning Tree Protocol (RSTP)
• Dynamic Domain Name System (TZO, DynDNS,
3322.org, NOIP)
• Network Address Translation (NAT), Port
Address Translation (PAT)
• One-to-One NAT
• Port management
• Port mirroring
• Software configurable DMZ to any LAN IP
address
• Session Initiation Protocol (SIP) Application
Layer Gateways (ALG)
Network Protocols
• Static routing, IGMP proxy
• Dynamic routing
• RIP v1 and v2
• RIP for IPv6 (RIPng)
• Inter-VLAN routing
Routing Protocols
Port Address Translation (PAT), Network Address
Port Translation (NAPT)
Port forwarding, One-to-one NAT, VPN NAT
Transversal, Session Initiation (SIP), Application
Level Gateway (ALG), FTP ALG
Network Address Translation (NAT Protocol
VPN
20 IPsec TunnelsGateway-to-Gateway IPsec VPN
20 IPsec TunnelsClient-to-Gateway IPsec VPN
RV260x Administration Guide
3
Getting Started
RV260X Product Features