Cisco RV260 series User Manual

Enter the RESTCONF port number. Default is 443.RESTCONF Port
The NETCONF protocol defines a simple mechanism through which a network device
can be managed, configuration data information can be retrieved, and new configuration
data can be uploaded and manipulated. Check Enable and LAN and/ or WAN to enable
NETCONF.
NETCONF
Enter the NETCONF port number.NETCONF Port
Check Enable to enable the LAN/VPN web management. Then select HTTP or HTTPS
and enter the port number in the Port field.
LAN/VPN Web
Management
Check Enable to enable remote web management.
• Select HTTP or HTTPS and enter the port (Default 443, Range 1025-65535).
Remote Web Management
Check Any IP Addresses or IPv4 or IPv6 address range and enter a From and To
range for remote access.
Allowed Remote IP Address
Check Enable to allow SIP ALG. This embeds messages of the SIP passing through a
configured device with Network Address Translation (NAT) to be translated and encoded
back to the packet.
SIP ALG (Session Initiation
Protocol Application Layer
Gateway)
Enter the port number. The default value is 21. FTP ALG port translates the FTP packets.FTP ALG Port
Check Enable to enable UPnP. UPnP is a set of networking protocols that permits
network devices (PCs, printers, Internet gateways, Wi-Fi access points, and mobile
devices), to seamlessly discover each other's presence on the network and establish
functional network services for data sharing and communications.
UPnP (Universal Plug and
Play)
Step 2 In the Restrict Web Features section, configure the following:
Check to restrict the following web features:
• Java: Blocks Web Java feature.
• Cookies: Blocks cookies.
• ActiveX: Blocks ActiveX.
• Access to HTTP Proxy Server: Blocks HTTP proxy servers.
Block
Check Enable to allow only the selected web features such as Java, Cookies, ActiveX, or Access to HTTP
Proxy Servers and restrict all others.
Exception
Step 3 In the Trusted Domains Table, check Domain Name to edit the existing domain settings.
Step 4 Click Add, Edit or Delete to add, edit or delete a domain.
Step 5 Click Apply.
RV260x Administration Guide
78
Firewall
Basic Settings

Cisco RV260 series Specifications

General

Brand	Cisco
Model	RV260 series
Category	Network Router
Language	English