Cisco SCE 8000 User Manual

4-7
Cisco SCE8000 GBE Installation and Configuration Guide
Chapter 4 Installing the Cisco SCE 8000 Chassis
AC-Powered Systems
Table 4-4 lists the AC-input power cord options, specifications, and Cisco product numbers for the 2700
W AC-input power supplies. It also references power cord illustrations.
Table 4-4 AC-Input Power Cord Options
Locale Part Number Length Plug Rating
Power Cord
Reference
Illustration
North America
(locking)
CAB-GSR16-US(
=)
14 feet (4.3m) 250VAC, 20A Figure 4-1
Europe CAB-GSR16-EU(
=)
14 feet (4.3m) 250VAC, 16A Figure 4-1
International CAB-AC16A-90L
-IN(=)
14 feet (4.3m) 250VAC, 16A Figure 4-1
China CAB-AC16A-CH
=
14 feet (4.3 m) 250VAC, 16A Figure 4-2
Continental
Europe
CAB-AC-2500W-
EU=
14 feet (4.3 m) 250VAC, 16A Figure 4-3
International CAB-AC-2500W-I
NT=
14 feet (4.3 m) 250VAC, 16A Figure 4-4
Israel CAB-AC-2500W-I
SRL=
14 feet (4.3 m) 250VAC, 16A Figure 4-5
Japan, North
America
(nonlocking plug)
200–240VAC
operation
CAB-AC-2500W-
US1=
14 feet (4.3 m) 250VAC, 16A Figure 4-6
Japan, North
America (locking
plug)
200–240VAC
operation
CAB-AC-C6K-T
WLK=
14 feet (4.3 m) 250VAC, 16A Figure 4-7
Japan, North
America
100–120VAC
operation1
CAB-7513AC= 14 feet (4.3 m) 125VAC, 20A Figure 4-8
South Africa CAB-7513ACSA= 14 feet (4.3 m) 250VAC, 16A Figure 4-9
Switzerland CAB-ACS-16= 8 feet 2 inches (2.5
m)
250VAC, 16A Figure 4-10
Australia, New
Zealand
CAB-AC-16A-AU
S=
14 feet (4.3 m) 250VAC, 16A Figure 4-11
Power Distribution
Unit (PDU(=)
1
1. The PDU power cable is designed for users who power their switch from a PDU. The end of the cable that plugs into the Cisco
SCE 8000 chassis has a C19 connector; the other end of the cable that plugs into the PDU has a C20 connector.
CAB-C19-CBN 9 feet (2.7 m) 250VAC, 16A Figure 4-12

Cisco SCE 8000 Specifications

General

Brand	Cisco
Model	SCE 8000
Category	Switch
Language	English