Cisco SD2008T-NA User Manual

Contents
11
Cisco Wireless LAN Controller Configuration Guide
OL-9141-03
Configuring a Static IP Address on an Access Point Converted to Lightweight Mode 24
Dynamic Frequency Selection 24
Retrieving the Unique Device Identifier on Controllers and Access Points 25
Using the GUI to Retrieve the Unique Device Identifier on Controllers and Access Points 26
Using the CLI to Retrieve the Unique Device Identifier on Controllers and Access Points 27
Performing a Link Test 27
Using the GUI to Perform a Link Test 29
Using the CLI to Perform a Link Test 30
Configuring Cisco Discovery Protocol 31
Configuring Power over Ethernet 33
Using the GUI to Configure Power over Ethernet 33
Using the CLI to Configure Power over Ethernet 35
Configuring Flashing LEDs 36
Authorizing Access Points Using MICs 36
CHAPTER 8 Managing Controller Software and Configurations 1
Transferring Files to and from a Controller 2
Upgrading Controller Software 2
Updating Controller Software 3
Saving Configurations 4
Clearing the Controller Configuration 5
Erasing the Controller Configuration 5
Resetting the Controller 5
CHAPTER 9 Managing User Accounts 1
Creating Guest User Accounts 2
Creating a Lobby Ambassador Account 2
Using the GUI to Create a Lobby Ambassador Account 2
Using the CLI to Create a Lobby Ambassador Account 4
Creating Guest User Accounts as a Lobby Ambassador 4
Viewing Guest User Accounts 6
Using the GUI to View Guest Accounts 6
Using the CLI to View Guest Accounts 7
Web Authentication Process 7
Choosing the Web Authentication Login Window 9
Choosing the Default Web Authentication Login Window 9
Using the GUI to Choose the Default Web Authentication Login Window 9
Using the CLI to Choose the Default Web Authentication Login Window 10

Cisco SD2008T-NA Specifications

General

Brand	Cisco
Model	SD2008T-NA
Category	Extender
Language	English