Cisco SD2008T-NA User Manual

7-26
Cisco Wireless LAN Controller Configuration Guide
OL-9141-03
Chapter 7 Controlling Lightweight Access Points
Retrieving the Unique Device Identifier on Controllers and Access Points
Using the GUI to Retrieve the Unique Device Identifier on Controllers and
Access Points
Follow these steps to retrieve the UDI on controllers and access points using the GUI.
Step 1 Click Controller > Inventory to access the Inventory page (see Figure 7-9).
Figure 7-9 Inventory Page
This page shows the five data elements of the controller UDI.
Step 2 Click Wireless to access the All APs page.
Step 3 Click the Detail link for the desired access point. The All APs > Details page appears (see Figure 7-10).

Cisco SD2008T-NA Specifications

General

Quality of Service (QoS)	Yes
Power over Ethernet	No
Mounting Type	Desktop
Jumbo Frame Support	Yes
Dimensions	160 x 104 x 28 mm (6.3 x 4.1 x 1.1 in)
Operating Temperature	0° to 40°C (32° to 104°F)
Storage Temperature	-20° to 70°C (-4° to 158°F)
Humidity	10% to 90% noncondensing