9-3
Cisco Wireless LAN Controller Configuration Guide
OL-9141-03
Chapter 9 Managing User Accounts
Creating Guest User Accounts
This page lists the names and access privileges of the local management users.
Note You can click Remove to delete any of the user accounts from the controller. However, deleting
the default administrative user prohibits both GUI and CLI access to the controller. Therefore,
you must create a user with administrative privileges (ReadWrite) before you remove the default
user.
Step 2 To create a lobby ambassador account, click New under Management. The Local Management Users >
New page appears (see Figure 9-2).
Figure 9-2 Management > Local Management Users > New Page
Step 3
In the User Name field, enter a username for the lobby ambassador account.
Note Management usernames must be unique because they are stored in a single database.
Step 4 In the Password and Confirm Password fields, enter a password for the lobby ambassador account.
Note Passwords are case sensitive.
Step 5 Choose LobbyAdmin from the User Access Mode drop-down box. This option enables the lobby
ambassador to create guest user accounts.
Note The ReadOnly option creates an account with read-only privileges, and the ReadWrite option
creates an administrative account with both read and write privileges.
Step 6 Click Apply to commit your changes. The new lobby ambassador account appears in the list of local
management users.
Step 7 Click Save Configuration to save your changes.
To Next Page
Loading...
Need help?
General
