Cisco SD2008T-NA - Using the GUI to View RF Group Status

10-9
Cisco Wireless LAN Controller Configuration Guide
OL-1926-06OL-9141-03
Chapter 10 Configuring Radio Resource ManagementWireless Device Access
Viewing RF Group Status
Figure 10-2 All APs Page
Step 2
Under 802.11a or 802.11b/g, click Network to access the 802.11a (or 802.11b/g) Global Parameters
page (see Figure 10-3).
Figure 10-3 802.11a Global Parameters Page
Step 3
Click Auto RF to access the 802.11a (or 802.11b/g) Global Parameters > Auto RF page (see
Figure 10-4).