3-16
Cisco Wireless LAN Controller Configuration Guide
OL-9141-03
Chapter 3 Configuring Ports and Interfaces
Configuring Dynamic Interfaces
Figure 3-6 Interfaces > New Page
Step 3
Enter an interface name and a VLAN identifier, as shown in Figure 3-6.
Note Enter a non-zero value for the VLAN identifier. Tagged VLANs must be used for dynamic
interfaces.
Step 4 Click Apply to commit your changes. The Interfaces > Edit page appears (see Figure 3-7).
Figure 3-7 Interfaces > Edit Page
To Next Page
Loading...
Need help?
General
