Contents
9
Cisco Wireless LAN Controller Configuration Guide
OL-9141-03
Using the GUI to Configure DHCP 5
Using the CLI to Configure DHCP 5
Configuring MAC Filtering for WLANs 6
Enabling MAC Filtering 6
Creating a Local MAC Filter 6
Configuring a Timeout for Disabled Clients 6
Assigning WLANs to VLANs 6
Configuring Layer 2 Security 7
Static WEP Keys 7
Dynamic 802.1X Keys and Authorization 7
Configuring a WLAN for Both Static and Dynamic WEP 8
WPA1 and WPA2 8
CKIP 12
Configuring Layer 3 Security 14
VPN Passthrough 15
Web-Based Authentication 16
Local Netuser 16
Configuring 802.3 Bridging 17
Configuring Quality of Service 17
Configuring QoS Enhanced BSS (QBSS) 18
Configuring Quality of Service Profiles 19
Configuring Cisco Client Extensions 22
Using the GUI to Configure CCX Aironet IEs 22
Using the GUI to View a Client’s CCX Version 24
Using the CLI to Configure CCX Aironet IEs 24
Using the CLI to View a Client’s CCX Version 25
Enabling WLAN Override 25
Using the GUI to Enable WLAN Override 25
Using the CLI to Enable WLAN Override 25
Configuring Access Point Groups 26
Creating Access Point Groups 27
Assigning Access Points to Access Point Groups 29
Configuring Multiple WLANs with the Same SSID 30
Additions to the Controller GUI 30
Addition to the Controller CLI 31
Configuring Conditional Web Redirect with 802.1X Authentication 32
Configuring the RADIUS Server 32
Using the GUI to Configure Conditional Web Redirect 34
Using the CLI to Configure Conditional Web Redirect 34
Disabling Accounting Servers per WLAN 35
To Next Page
Loading...
Need help?
General
