Cisco SG500-28P Administration Guide

26
Cisco 500 Series Stackable Managed Switch Administration Guide Release 1.3 510
SNMP
This section describes the Simple Network Management Protocol (SNMP) feature
that provides a method for managing network devices.
It covers the following topics:
• SNMP Versions and Workflow
• Model OIDs
• SNMP Engine ID
• Configuring SNMP Views
• Creating SNMP Groups
• Managing SNMP Users
• Defining SNMP Communities
• Defining Trap Settings
• Notification Recipients
• SNMP Notification Filters
SNMP Versions and Workflow
The device functions as SNMP agent and supports SNMPv1, v2, and v3. It also
reports system events to trap receivers using the traps defined in the supported
MIBs (Management Information Base).

Cisco SG500-28P Specifications

General

Switching Capacity	56 Gbps
Forwarding Rate	41.67 Mpps
Flash Memory	32 MB
Operating Humidity	10% to 90% non-condensing
PoE	Yes
Layer	Layer 2 and Layer 3
Stackable	Yes
Power Supply	Internal
Management	Web-based GUI, CLI, SNMP
Jumbo Frame Support	Yes
VLANs	4096 VLANs
MAC Address Table Size	16K entries
Dimensions	440 x 44 x 350 mm
Operating Temperature	0°C to 45°C
Ports	28 (24 x 10/100/1000 PoE+ ports, 4 x 10/100/1000/SFP combo ports)