Cisco SG500-28P Administration Guide

Cisco 500 Series Stackable Managed Switch Administration Guide 1
Contents
Chapter 1: Getting Started 1
Starting the Web-based Configuration Utility 1
Launching the Configuration Utility 2
HTTP/HTTPS 3
Logging Out 4
Quick Start Device Configuration 5
Interface Naming Conventions 6
Differences Between Sx500, SG500X and the ESW2-550X Devices 6
Window Navigation 8
Application Header 8
Management Buttons 10
Chapter 2: Status and Statistics 12
Viewing Ethernet Interfaces 12
Viewing Etherlike Statistics 13
Viewing GVRP Statistics 15
Viewing 802.1X EAP Statistics 16
Viewing TCAM Utilization[ 17
Managing RMON 18
Viewing RMON Statistics 19
Configuring RMON History 21
Viewing the RMON History Table 22
Defining RMON Events Control 23
Viewing the RMON Events Logs 24
Defining RMON Alarms 24
Chapter 3: Administration: System Log 28
Setting System Log Settings 28
Setting Remote Logging Settings 30
Viewing Memory Logs 31
RAM Memory 32
Flash Memory 32

Cisco SG500-28P Specifications

General

Switching Capacity	56 Gbps
Forwarding Rate	41.67 Mpps
Flash Memory	32 MB
Operating Humidity	10% to 90% non-condensing
PoE	Yes
Layer	Layer 2 and Layer 3
Stackable	Yes
Power Supply	Internal
Management	Web-based GUI, CLI, SNMP
Jumbo Frame Support	Yes
VLANs	4096 VLANs
MAC Address Table Size	16K entries
Dimensions	440 x 44 x 350 mm
Operating Temperature	0°C to 45°C
Ports	28 (24 x 10/100/1000 PoE+ ports, 4 x 10/100/1000/SFP combo ports)