Cisco SPS208G User Manual

SNMP
Communities
SPS208G/SPS224G4/SPS2024 Service Provider Switches User Guide 229
12
• Advanced Table
The Communities Parameters area contains the following fields:
• SNMP Management Station — Defines the management station IP address
for which the advanced SNMP community is defined. There are two
definition options:
- Define the management station IP address.
- Select All, which includes all management station IP addresses.
• Community String — Defines the password used to authenticate the
management station to the device.
• Basic — Enables SNMP Basic mode for a selected community and contains
the Access Mode and View Name fields.
• Access Mode — Defines the access rights of the community. The possible
field values are:
- Read Only — Management access is restricted to read-only, and
changes cannot be made to the community.
- Read Write — Management access is read-write and changes can be
made to the device configuration, but not to the community.
- SNMP Admin — User has access to all device configuration options, as
well as permissions to modify the community.
• View Name — Contains a list of user-defined SNMP views. The possible
values are:
- Default — View that defines the default group access rights.
- DefaultSuper — View that defines the default group access rights for
administrator.
- If additional SNMP views have been defined, they also appear in this list.
• Advanced — Enables SNMP Advanced mode for a selected community
and contains the following field:
- Group Name — Assigns the SNMP community to a specific group.
STEP 2 Define the relevant fields.
STEP 3 Click Add to List. The new community is displayed in either the Basic Table or
Advanced Table at the bottom of the screen.

Cisco SPS208G Specifications

General

Brand	Cisco
Model	SPS208G
Category	Switch
Language	English