SNMP
Communities
SPS208G/SPS224G4/SPS2024 Service Provider Switches User Guide 231
12
• Community String — Displays the password used to authenticate the
management station to the device.
• Group Name — Displays the group to which this community belongs.
To modify an SNMP community:
STEP 1 Select the community in the Basic or Advanced Table.
STEP 2 Define the relevant fields.
STEP 3 Click Update. The SNMP community is updated in the respective Table. The
device is updated.
To delete an SNMP community from the device:
STEP 1 Select the community in the Basic or Advanced Table.
STEP 2 Click Delete. The selected SNMP community is deleted from the device.
To Next Page
Loading...
