Cisco SPS208G User Manual

SNMP
Notification Recipient
SPS208G/SPS224G4/SPS2024 Service Provider Switches User Guide 237
12
STEP 2 Define the relevant fields.
STEP 3 Click Add to List. The new notification recipient is displayed in either the
SNMPv1,2 Table or the SNMPv3 Table at the bottom of the screen.
The Add to List button adds the notification recipient to either the SNMPv1,2 Table
or the SNMPv3 Table at the bottom of the screen.
Figure 108 Notification Recipient Table
To modify an SNMP notification recipient:
STEP 1 Select the recipient in either the SNMPv1,2 Table or the SNMPv3 Table.
STEP 2 Define the relevant fields.
STEP 3 Click Update. The SNMP notification recipient is updated in the respective Table.
The device is updated.
To delete an SNMP notification filter from the device:
STEP 1 Select the recipient in either the SNMPv1,2 Table or the SNMPv3 Table.
STEP 2 Click Delete. The selected filter is deleted from the device.

Cisco SPS208G Specifications

General

Brand	Cisco
Model	SPS208G
Category	Switch
Language	English