Cisco SPS208G User Manual

Port Management
Link Aggregation
SPS208G/SPS224G4/SPS2024 Service Provider Switches User Guide 45
3
• LAG Type — Displays the LAG type. The possible field values are:
- 100 MB copper
- 1000 MB copper
• Admin Status — Enables or disables traffic forwarding through the selected
LAG. The possible field values are:
- Up — Traffic forwarding is enabled through this LAG.
- Down — Traffic forwarding is disabled through this LAG.
• Current Status — Indicates if the LAG is currently up or down.
• Oper Duplex — Indicates the LAG’s duplex type when auto-negotiation is
disabled. The possible values are:
- Half — LAG operates in half-duplex.
- Full — LAG operates in full-duplex.
• Reactivate Suspended — Reactivates a LAG if the LAG has been disabled.
A LAG is suspended if a Lock Port action has been applied on a LAG
member.
• Operational Status — Defines whether the port is currently operational or
non-operational.
• Admin Auto Negotiation — Enables or disables Auto Negotiation on the
LAG. Auto-negotiation is a protocol between two link partners that enables
a LAG to advertise its transmission rate, duplex mode and flow control (the
flow control default is disabled) abilities to its partner.
• Current Auto Negotiation — The current Auto Negotiation setting.
• Admin Speed — The configured speed at which the LAG is operating. The
auto negotiation should be disabled before setting the speed manually.
• Current Speed — The current speed at which the LAG is operating.
• Admin Flow Control — Enables or disables flow control or enables the auto
negotiation of flow control on the LAG.
• Current Flow Control — The user-designated Flow Control setting.

Cisco SPS208G Specifications

General

Brand	Cisco
Model	SPS208G
Category	Switch
Language	English