Cisco TelePresence SX10 User Manual

16
D1509712 User Guide
Cisco TelePresence SX10, SX20
Produced: June 2017 for CE9.1
All contents © 2010–2017
Cisco Systems, Inc. All rights reserved.
•
If someone calls you, you may
accept, decline or ignore the call.
•
If you decline the call, busy
information will be sent to the
calling party.
•
If you ignore the call, the calling
party will perceive this as if you
were absent (you did not pick up
the call.
•
Your video infrastructure may allow
you to receive multiple incoming
calls. Consult your video support
team, if needed.
Receive Additional Calls While Already In a Call
Video Calls
Expanding the Call
If you are already in a call, and someone calls you, you may
decline the call, add the caller to the existing call or put the
existing call on hold while receiving

Cisco TelePresence SX10 Specifications

General

Digital zoom	2 x
Optical zoom	2.65 x
Supported video modes	1080p, 720p
Video formats supported	H.263, H.264, MPEG4
Supported graphics resolutions	176 x 144, 352 x 288, 704 x 576, 1024 x 576 (WSVGA), 1024 x 768 (XGA), 1280 x 720 (HD 720), 1920 x 1080 (HD 1080), 640 x 480 (VGA)
Voice codecs	G.711, G.711a, G.722, G.722.1, G.729, G.729A
Ethernet LAN (RJ-45) ports	1
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Power consumption (typical)	12 W
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Depth	91 mm
Width	275 mm
Height	117 mm
Weight	900 g