Cisco TelePresence SX10 User Manual

21
D1509712 User Guide
Cisco TelePresence SX10, SX20
Produced: June 2017 for CE9.1
All contents © 2010–2017
Cisco Systems, Inc. All rights reserved.
This feature lets you dene a name,
number or address to which all calls
will be forwarded as long as the
feature is active.
You may choose between
forwarding all calls to your Voicemail
(if applicable) or to a specied
receiver. Choosing the latter will
send you to the Call menu to let you
choose whom to forward to.
Forward All Calls
Video Calls
About Forwarding
Starting from Home screen, use the Cursor keys on the remote
control to select the Settings icon in the upper left corner of
the screen.
Press OK on the remote control.
Use the Cursor keys to navigate to Forward all calls to... . If
you want to forward all calls to Voicemail instead, navigate to
Forward all calls to Voicemail, press OK and you are done.
Choosing Forward all calls to... will send you to the Call menu. Select
whom to receive all calls in the same way as if you were about to call
that person.
1 2
3 4

Cisco TelePresence SX10 Specifications

General

Digital zoom	2 x
Optical zoom	2.65 x
Supported video modes	1080p, 720p
Video formats supported	H.263, H.264, MPEG4
Supported graphics resolutions	176 x 144, 352 x 288, 704 x 576, 1024 x 576 (WSVGA), 1024 x 768 (XGA), 1280 x 720 (HD 720), 1920 x 1080 (HD 1080), 640 x 480 (VGA)
Voice codecs	G.711, G.711a, G.722, G.722.1, G.729, G.729A
Ethernet LAN (RJ-45) ports	1
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Power consumption (typical)	12 W
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Depth	91 mm
Width	275 mm
Height	117 mm
Weight	900 g