Cisco TelePresence SX10 - Gain Access to the Settings; About Settings

37
D1509712 User Guide
Cisco TelePresence SX10, SX20
Produced: June 2017 for CE9.1
All contents © 2010–2017
Cisco Systems, Inc. All rights reserved.
Gain Access to the Settings
Settings
The System information page
provides information on IP address,
MAC address, SIP Proxy, software
version installed and device name.
The system can be restarted from
here and setup wizard is available
via Advanced settings.
About Settings
To gain access to the Settings menu,
navigate to the upper left corner of the
screen and press OK on the remote
control. Then navigate down to System
Information (number two from the
bottom of the menu) and press OK
again.
The Settings shows basic information about the system as well as providing access to the
Setup Wizard and the ability to force a restart of the system.
1 2