25
D1509712 User Guide
Cisco TelePresence SX10, SX20
Produced: June 2017 for CE9.1
All contents © 2010–2017
Cisco Systems, Inc. All rights reserved.
Use this feature to share content
on your PC in a call or outside a
call. The procedure is the same, but
shown here is the in-call way only.
To share content using Proximity,
make sure your presentation source
has Cisco Proximity installed and
activated. Allow some time for the
pairing to take place. Follow on-
screen instructions.
Start and Stop Presentation
Content Sharing
About Content Sharing
You may now select Local preview to inspect the contents
without sharing it with the others, before you select Share in
call to share it with the others.
Make sure your presentation source is connected and On. You
may need to select Share and press OK on the remote control.
The size of the shared image is controlled by means of the
Minimize/Maximize button. Select this and press OK on the
remote control, if needed.
To stop sharing content, select Stop sharing (which appears along
the bottom of the display (number 1 from the left) and press OK on
the remote control.
1 2
3 4
Share in call
Stop sharing
To Next Page
Loading...
